Caring for the DEUS™ Controlled Descent Devices

Product Care
DEUS Controlled Descent Devices (DEUS 3100 & DEUS 3300) are designed to provide about 100 descents before servicing. But, because every descent is different, and some descents punish equipment more than others, DEUS Controlled Descent Devices should be inspected after every descent. For factory reconditioning services, contact DEUS Rescue toll free at 866-405-3461 or send an email to service@DEUSrescue.com. Factory reconditioning includes replacement of worn parts, a complete inspection, and test of the device. Do not trust your life - or the lives of others - to equipment that has not been properly maintained.

DEUS Controlled Descent Devices are designed to be used only with DEUS™ ropes. Do not attempt to use any other rope with the DEUS 3100 or the DEUS 3300. Use of any other rope can result in injury or death.

Maintenance for Safe Operation
Using a DEUS Controlled Descent Device in an emergency exposes the device to extreme conditions. Therefore, it is important that you check the unit for damage or wear after every descent, whether in emergency use or in training. Follow these simple steps to ensure safe operation:

1. Remove the rope and check the rope-guide surfaces for burs and nicks.
2. Check that the control knob turns freely between "engaged" and "disengaged."
3. Check that the rear cover plate opens and closes freely.
4. Turn the control knob to the "disengaged" position and check that the brake wheel spins freely.
5. Turn the control knob to the "engaged" position and check that the brake wheel does not spin at all.

Remember to do this after every descent. If ANYTHING about the device does not look right or does not work correctly, contact DEUS Rescue immediately for service and place the unit in "inactive" status until it has been rectified.